NVE 887 Challenger

$7904.00 Free Shipping In The US * Boasting an air flow of 532 CFM at a maximum of 1,200 RPM. The NVE 887 Challenger has a porting size of 4” and a shaft size of 1-3/4”, the HP required at full vacuum is 30 at 1100 RPM or 33 at 1200 RPM. At Meters Inc., we are your source for the NVE 887 Challenger.

NVE 887 Challenger Features

The NVE 887 Challenger is designed, manufactured and supported in the USA. It includes a demonstrated crash protection system that shields the major elements of this unit from the results of a catastrophic failure. Additional features include hydraulic and gearbox drive options, integral final filter with easy accessibility, improved axial load capabilities, vane flush port with valve, vane wear inspection port through filter, thorough exhaust check, providing negligible obstruction of free air, connected ballast silencing configuration, attached ballast silencing system, and vacuum-controlled ballast air cooling system.

Depending on the RPM, altitude, ambient temperature, and running time, the maximum allowable operating vacuum will vary. More heat in the pump is required with faster RPM, longer run time, and higher air temperature. The recommended RPM with the installation of an NVE 887 pump is 1100. Other RPMs may be acceptable provided the supplied thermometer temperature reading of the exhaust gas is not greater than 380 oF.

Get the NVE 887 Challenger

For additional information about the NVE 887 Challenger we offer at Meters Inc., give us a call today at 734.532.4124 or complete our contact form and send us a message.