NVE 887 Challenger Vacuum Pump
Free Shipping in the US
Air Flow: 532 CFM
Max Vacuum: 28″ HG
1,100 RPM or 1,200 RPM
Porting Size: 4″
HP Required at Full Vacuum 30 for 1100 RPM or 33 at 1200 RPM
Features
Proven crash protection allowing all major components to survive a
catastrophic failure
Four-Point Automatic Lubrication System
Multiple drive options (gearbox and hydraulic)
Integral, easily accessible, final filter
Vane flush port with valve
Vane wear inspection port through the filter
Enhanced axial load capabilities
Lifetime warranty against cracked housing
Two-year warranty against manufacturer defect
Vacuum-controlled ballast air cooling system
Attached ballast silencing system
An enhanced exhaust check which provides minimal free air
obstructionDesigned, built, and supported in the USA
NVE Owners Manual
Free Shipping in the US
Air Flow: 532 CFM
Max Vacuum: 28″ HG
1,100 RPM or 1,200 RPM
Porting Size: 4″
HP Required at Full Vacuum 30 for 1100 RPM or 33 at 1200 RPM
Features
Proven crash protection allowing all major components to survive a
catastrophic failure
Four-Point Automatic Lubrication System
Multiple drive options (gearbox and hydraulic)
Integral, easily accessible, final filter
Vane flush port with valve
Vane wear inspection port through the filter
Enhanced axial load capabilities
Lifetime warranty against cracked housing
Two-year warranty against manufacturer defect
Vacuum-controlled ballast air cooling system
Attached ballast silencing system
An enhanced exhaust check which provides minimal free air
obstructionDesigned, built, and supported in the USA
NVE Owners Manual
Free Shipping in the US
Air Flow: 532 CFM
Max Vacuum: 28″ HG
1,100 RPM or 1,200 RPM
Porting Size: 4″
HP Required at Full Vacuum 30 for 1100 RPM or 33 at 1200 RPM
Features
Proven crash protection allowing all major components to survive a
catastrophic failure
Four-Point Automatic Lubrication System
Multiple drive options (gearbox and hydraulic)
Integral, easily accessible, final filter
Vane flush port with valve
Vane wear inspection port through the filter
Enhanced axial load capabilities
Lifetime warranty against cracked housing
Two-year warranty against manufacturer defect
Vacuum-controlled ballast air cooling system
Attached ballast silencing system
An enhanced exhaust check which provides minimal free air
obstructionDesigned, built, and supported in the USA
NVE Owners Manual
NVE 887 Challenger
$7904.00 Free Shipping In The US * Boasting an air flow of 532 CFM at a maximum of 1,200 RPM. The NVE 887 Challenger has a porting size of 4” and a shaft size of 1-3/4”, the HP required at full vacuum is 30 at 1100 RPM or 33 at 1200 RPM. At Meters Inc., we are your source for the NVE 887 Challenger.
NVE 887 Challenger Features
The NVE 887 Challenger is designed, manufactured, and supported in the USA. It includes a demonstrated crash protection system that shields the major elements of this unit from the results of a catastrophic failure. Additional features include hydraulic and gearbox drive options, integral final filter with easy accessibility, improved axial load capabilities, vane flush port with valve, vane wear inspection port through filter, thorough exhaust check, providing negligible obstruction of free air, connected ballast silencing configuration, attached ballast silencing system, and vacuum-controlled ballast air cooling system.
The maximum allowable operating vacuum will vary depending on the RPM, altitude, ambient temperature, and running time. More heat in the pump is required with faster RPM, longer run time, and higher air temperature. The recommended RPM with the installation of an NVE 887 pump is 1100. Other RPMs may be acceptable provided the supplied thermometer temperature reading of the exhaust gas is not greater than 380 oF.
Get the NVE 887 Challenger
For additional information about the NVE 887 Challenger we offer at Meters Inc., give us a call today at 734.532.4124 or complete our contact form and send us a message.
